Netgear LG6100D ユーザーガイド
Your Network Connections
35
The MAC filter is used to grant (white list) or block (black list) wireless devices access to the
Main and Guest Wi-Fi networks. Access is based on the MAC address of each wireless device.
Main and Guest Wi-Fi networks. Access is based on the MAC address of each wireless device.
In the MAC Filter page (Wi-Fi > Mac Filter), you can choose one of three modes:
●
None: All computers are allowed to access the network.
●
Black list: All computers are allowed to access the network, unless they’re in this list.
●
White list: Only computers that are in this list are allowed to access the network.
Regardless of the mode, a user must provide the correct Wi-Fi password to access the network.
To specify computers that can access the network:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)
4. Click Wi-Fi and then click the MAC Filter tab.
5. Beside MAC Filter Mode, select White list.
6. In the empty Name field, enter a name for the device. For example, Amy’s PC.
7. In the empty MAC Address field, enter the MAC address of the device you’re adding to
8. Click the
beside the row. Repeat steps 6 through 8 for each computer for which you
want to allow access.
IMPORTANT: Make sure you add the computer you are using, or else you will not be able to
access the network after your device resets.
access the network after your device resets.
9. Click Submit.
To specify computers that are not allowed to access the network:
1. On a computer or wireless device that is connected to your gateway, launch a Web
browser.
2. In the address or URL field of your browser, type http://myrouter.
3. When prompted to log in, enter admin for the user name and type the password. (The
default password is password.)