JVC HR-P111EE ユーザーズマニュアル
9
1
2
1
2
Use the following procedure to record TV programmes on a
blank video tape.
blank video tape.
Before proceeding:
•
To record TV programmes, the video cassette player must
be connected to the TV as shown in connection B of the
“Connections” section.
be connected to the TV as shown in connection B of the
“Connections” section.
•
Turn on the power of the TV and video cassette player.
•
Make sure that the video cassette’s safety tab is intact. If it
has been removed, cover the hole with adhesive tape.
has been removed, cover the hole with adhesive tape.
Recording
1
2
Load a blank video tape.
Press the Record
¶
¶
¶
¶
¶
button to start recording. (On the
remote control unit press the Record
¶
¶
¶
¶
¶
and Play
3
3
3
3
3
buttons at the same time.)
The recording indicator will light during recording.
The recording indicator will light during recording.
7
Press the Stop/Eject
§
button or the remote control’s
Stop
7
7
7
7
7
button to stop recording.
To stop recording temporarily:
7
Press the Pause
8
button.
The recording indicator will blink.
Press the Play
Press the Play
3
button to resume recording.
Notes:
•
To engage recording standby, press the Record
¶
button
and then press the Pause
8
button. The recording indicator
will blink during recording standby. Press the Play
3
button
again to start recording.
•
If the Record
¶
button does not work, check to see if the
cassette safety tab has been removed.
•
The player automatically stops when record-standby
continues for more than 5 minutes.
continues for more than 5 minutes.
•
The video tape will be rewound automatically when the end
of the tape is reached.
of the tape is reached.
SCENE
FINDER
FINDER
SP/LP/EP
NTSC
ON PAL TV
ON PAL TV
NTSC4.43
NTSC3.58
STANDBY
OPERATE
LP/EP
PAL NTSC
B.E.S.T.
B.E.S.T.
AUDIO
- TVCH +
- VOLUME +
TV/VIDEO
AUTO
- TRACKING +
TV/VIDEO
OPERATE
VIDEO
OPERATE
REMOTE CONTROL UNIT
+
-
(
L
[
J
+
(
TV
2
Rewind power off
When the tape has finished rewinding, the VCR will turn itself
off.
off.
During stop:
Press the Rewind
1
button.
Press the OPERATE button within 2 seconds.
The STANDBY indicator will blink.
The STANDBY indicator will blink.
Tracking adjustment
Automatic tracking is adjusted each time a cassette is inserted
in the video cassette player, you may wish to adjust tracking
manually during playback.
in the video cassette player, you may wish to adjust tracking
manually during playback.
Manual tracking
Press the remote control’s AUTO button.
Press the remote control’s TRACKING + or – button to
adjust tracking.
adjust tracking.
7
Press the AUTO button to return to automatic tracking.
Notes:
•
Tracking may need to be adjusted each time a different video
tape is inserted for playback.
tape is inserted for playback.
•
Tracking will be automatically set to the reference position
when the cassette is ejected.
when the cassette is ejected.
Playback features (cont’d)
2
1