BMW 2010 328i Sedan オーナーマニュアル
Driving
64
3 Deactivate system, refer to page
4 Resume stored desired speed and dis-
tance, refer to page
5 Select distance to vehicle driving ahead,
refer to page
Storing current speed
Briefly press the lever, arrow
1, or briefly pull it,
arrow
2, at a driving speed of more than approx.
20 mph or 30 km/h.
The car's current speed is stored. It is displayed
on the speedometer and briefly in the instru-
ment cluster.
on the speedometer and briefly in the instru-
ment cluster.
Increasing desired speed
Press or tap the lever to the resistance point or
beyond, arrow
beyond, arrow
1, until the desired speed is dis-
played.
>
Each time the lever is tapped to the resis-
tance point, the desired speed is increased
by approx. 1 mph or 1 km/h.
tance point, the desired speed is increased
by approx. 1 mph or 1 km/h.
>
Each time the lever is tapped beyond the
resistance point, the desired speed is
increased by up to 5 mph or 10 km/h until
the maximum speed of 110 mph or
180 km/h is achieved.
resistance point, the desired speed is
increased by up to 5 mph or 10 km/h until
the maximum speed of 110 mph or
180 km/h is achieved.
The speed then displayed is stored and
achieved on a clear road.
achieved on a clear road.
Decreasing desired speed
Pull the lever, arrow
2, until the desired speed is
displayed.
The other functions work analogously to those
described under Increasing desired speed.
The other functions work analogously to those
described under Increasing desired speed.
Selecting distance
>
Press downward:
Increase distance.
Increase distance.
>
Press upward:
Decrease distance.
Decrease distance.
The selected distance is displayed in the instru-
ment cluster.
ment cluster.
Use good judgment to select the appro-
priate following distance given road con-
priate following distance given road con-
ditions, traffic, applicable laws and driving rec-
ommendations for safe following distance.
Otherwise, an accident risk could result.
ommendations for safe following distance.
Otherwise, an accident risk could result.
<
Distance 1
Distance 2
Distance 3
Distance 4
This is always the preset dis-
tance when you use the system
for the first time after starting the
engine.
This is always the preset dis-
tance when you use the system
for the first time after starting the
engine.
Online Edition for Part no. 01 41 2 603 048 - © 08/09 BMW AG
Online Edition for Part no. 01 41 2 603 048 - © 08/09 BMW AG