John Deere OMPC20964 ユーザーズマニュアル

ページ / 158
GS2 Display—StarFire iTC
OUO6050,000223E
–19–14NOV06–1/1
Correction Mode
Contains available StarFire corrections that the
receiver is licensed for. SF1 and OFF will always
appear, however, SF2 will only appear with a valid
SF2 license (See Activations section). RTK appears
when a RTK mode is selected from RTK softkey.
NOTE: By selecting OFF, StarFire receiver will not
receive SF1 or SF2 correction signals, but will
receive WAAS/EGNOS correction signals.
OUO6050,000223F
–19–14NOV06–1/1
Correction Frequency
This is the frequency that is used to receive differential
correction signals. The default frequency is a view only
field when default check box is checked. By
de-selecting default check box a correction frequency
can be manually entered.
IMPORTANT: DO NOT change default StarFire
Correction Frequency unless
instructed to do so by a John Deere
Dealer or by John Deere AG
Management Solutions.
OUO6050,0002240
–19–14NOV06–1/1
Mount Direction
NOTE: Receivers attached to tractors, sprayer, and
combines are typically in FORWARD position.
Receivers attached to GATORS are typically in
BACKWARD position.
Mounting direction is direction receiver is facing.
This setting defines mounting orientation of receiver.
TCM uses this setting to determine correct direction of
vehicle roll.
Mounting direction options
• FORWARD
• BACKWARD
Select desired mounting direction.
15-5
121907
PN=13