John Deere OMPC20964 ユーザーズマニュアル
Troubleshooting and Diagnostics
OUO6050,0002236
–19–25NOV06–1/5
STARFIRE iTC Diagnostic Addresses
NOTE: Invalid address values will be noted as all 9’s
(99999999).
Control Unit
Add.
Description
Details
iTC
000
Controller unit identifier
iTC
001
Diagnostic Trouble Codes
Has Codes - Select entry to display Diagnostic
Trouble Codes
Trouble Codes
iTC
002
System Beep: iTC system beep mode
iTC
003
GPS time in Universal Time Coordinate format.
Shown in hours:minutes:seconds
iTC
004
DISPLAY: GPS Date based off universal time.
Shown in days, months, years
iTC
005
DISPLAY: Latitude value with TCM corrections.
Shown in
± degrees
iTC
006
DISPLAY: Longitude value with TCM corrections.
Shown in
± degrees
iTC
007
DISPLAY: Altitude above sea level
Shown in meters
iTC
008
DISPLAY: GPS heading with TCM corrections.
Shown in degrees
iTC
009
DISPLAY: GPS speed.
Shown in kph
iTC
010
DISPLAY: GPS position status.
0 = none - No GPS position
1 = 2D - GPS position (2 dimensional)
2 = 3D - GPS position (3 dimensional)
1 = 2D - GPS position (2 dimensional)
2 = 3D - GPS position (3 dimensional)
iTC
011
DISPLAY: Current differential corrections being
0 = No differential correction signal
used.
1 = Other differential correction signal
3 = Government differential correction signal
(EGNOS)
6 = Form of RTK differential correction signal
7 = RTK differential correction signal
9 = Dual signal, no external differential correction
signal
10 = Dual channel mode receiving EGNOS
differential correction signal
11 = Dual channel mode receiving experimental
EGNOS differential correction signal
12 = STARFIRE corrections (RTG)
13 = Receiver in dual channel mode receiving
STARFIRE correction
3 = Government differential correction signal
(EGNOS)
6 = Form of RTK differential correction signal
7 = RTK differential correction signal
9 = Dual signal, no external differential correction
signal
10 = Dual channel mode receiving EGNOS
differential correction signal
11 = Dual channel mode receiving experimental
EGNOS differential correction signal
12 = STARFIRE corrections (RTG)
13 = Receiver in dual channel mode receiving
STARFIRE correction
iTC
012
DISPLAY: Estimated Quality of receiver position
1 to 10
coordinates.
iTC
013
DISPLAY: Estimated Quality of received GPS signal.
Shown in per cent
iTC
14
DISPLAY: Quality of received StarFire corrections
1 to 10
signal.
iTC
015
DISPLAY: Age of correction data received.
Shown in seconds
iTC
016
DISPLAY: Angle above horizon which satellites are
Shown in degrees
included in navigational solution.
iTC
017
DISPLAY: Number of satellites being tracked
1 to 12
iTC
018
DISPLAY: Number of satellites used for navigation
1 to 12
solution.
iTC
19
DISPLAY: Positional Dilution of Precision
40-4
121907
PN=140
Continued on next page