Motion Computing M1300 取り扱いマニュアル
Appendix
A Troubleshooting and Support
Motion Computing Tablet PC User Guide iv
PROBLEM
CAUSE
SOLUTION
P
EN
(C
ONTINUED
)
The Pen button doesn’t work. I
can’t get it to right-click.
can’t get it to right-click.
The right-click option for the Pen
button may be deactivated.
button may be deactivated.
Re-activate the right-click option:
Double-click the Tablet and Pen
Settings icon, select Pen Options,
and reselect Use pen button to
right-click. Select Apply>OK.
Double-click the Tablet and Pen
Settings icon, select Pen Options,
and reselect Use pen button to
right-click. Select Apply>OK.
You may not be correctly timing
clicking the Pen button and
tapping the Pen on the display.
clicking the Pen button and
tapping the Pen on the display.
To right-click, hold the Pen button
down and then tap on the display.
down and then tap on the display.
The buttons on the Tablet PC
don’t do what I expect them to do.
don’t do what I expect them to do.
Button functions have been
changed.
changed.
Double-tap the Tablet and Pen
Settings icon, then Tablet
Buttons. You can reset the
buttons to the defaults. Note:
Button functions are associated
with the orientation in which
they’re programmed.
Settings icon, then Tablet
Buttons. You can reset the
buttons to the defaults. Note:
Button functions are associated
with the orientation in which
they’re programmed.
I
NTERFACE
/P
ORTS
The system doesn’t recognize the
PC card I’ve inserted.
PC card I’ve inserted.
The card is incorrectly inserted.
Eject the card and re-insert it with
the label side up.
the label side up.
The device is not supported.
Check Windows XP compatibility.
The system doesn’t recognize a
USB or IEEE 1394 device.
USB or IEEE 1394 device.
Windows XP may take a short
time to recognize the device.
time to recognize the device.
Wait until Windows XP recognizes
the device.
the device.
The accessory isn’t connected to
the Tablet PC correctly.
the Tablet PC correctly.
Check the connection cable and
be sure it is inserted into the
correct port on the Tablet PC and
the accessory device.
be sure it is inserted into the
correct port on the Tablet PC and
the accessory device.
The correct driver isn’t built into
Windows XP.
Windows XP.
Use the device’s installation CD or
check the manufacturer’s website
for the correct driver.
check the manufacturer’s website
for the correct driver.
The Tablet PC is sitting in the
Motion FlexDock, but the system
doesn’t recognize any accessory
devices, such as the external
monitor or CDROM.
Motion FlexDock, but the system
doesn’t recognize any accessory
devices, such as the external
monitor or CDROM.
The Tablet PC isn’t fully seated in
the Motion FlexDock.
the Motion FlexDock.
Reseat the Tablet PC in the
Motion FlexDock.
Motion FlexDock.
A
UDIO
The built-in microphone doesn’t
seem to hear my voice correctly.
seem to hear my voice correctly.
The built-in microphone is not
intended for dictation.
intended for dictation.
For speech recognition, attach a
headset microphone. A DSP
headset provides good results.
headset microphone. A DSP
headset provides good results.
No sound is coming from the built-
in speakers.
in speakers.
Connecting a headset or external
speakers mutes the built-in
speakers.
speakers mutes the built-in
speakers.
Disconnect the headset or
external speakers if not in use.
external speakers if not in use.
No sound is coming from any
speakers.
speakers.
Audio volume is too low or has
been muted.
been muted.
Open the Motion Dashboard and
adjust the speaker volume by
sliding the volume slider or
uncheck the Mute button.
adjust the speaker volume by
sliding the volume slider or
uncheck the Mute button.