Maretron INTERNET PROTOCOL GATEWAY IPG100 ユーザーズマニュアル

 

 

This entry al
enter any information you like here, such as the date the unit was installed, or the location in 
which it was installed, for later reference.  Tools such as Maretron N2KAnalyzer

®

 allow you to 

view these values later. The default installation description is blank text. 
 

This option restores all settings on the IPG100 device to their factory default state. 
 

Program this

 whic

his device.  Maretron display 

products wil
label is blan
 

rogram this para

 clients must be 

er

®

 Connection 

Configuring thi
Maretron Cloud
embedded N2K
connection, pro

e) 

ices. If you do not 

ish to use Maretr

actory default), to 

 

his parameter

tion settings 

ault value), the 

 will ob

Mask, Default 

server on the local area network. Most routers have 

sult the user documentation for your network’s 

 to “No” and manually 

onfigure the IP Address (section 3.6), Subnet Mask (section 3.7), Default Gateway (section 

lows you to modify the NMEA 2000

®

 installation description text strings.  You can 

 parameter with a tex

g

h identifies t

t strin

l display this label text when you are selecting data to display. The default device 
k. 

P

meter with a text password. Any connecting N2KView

®

ame password in the “Connections Settings -> N2KServ

®

 software. The default password is blank. 

has an Internet connection, and you have subscribed to Maretron Cloud Serv

on Cloud services, set this parameter to “Disabled” (f

programmed with the s
->Pas word” field in th

s

e N2KView

 

s entry to “Enable” allows the IPG100 to attempt a server connection to 

 Services. You may then use Maretron Cloud Services to connect to the 

Server and access your boat’s network from anywhere with an Internet 

vided that your boat has an Internet connection, your client (PC or smartphon

w
prevent the IPG100 from attempting to contact Maretron Cloud Services. 

 determines whether or not the IPG100 obtains its LAN connec

T
from a DHCP server on the local area network. When set to “Yes” (the def

PG100

tain all necessary connection settings (IP Address, Subnet 

I
Gateway, and Default DNS)  from a DHCP 
the capability to act as a DHCP server. Con
router for details.  
 
If there is no DHCP server on the local area network (or if the IPG100 is connected directly to 
a DSM800 or directly to an MBB100), set the “DHCP” parameter
c
3.8), Default DNS (section 3.9).