Made By Humans E Series ユーザーガイド

Your Fujitsu LifeBook Series notebook contains a display 
panel that is backlit for easier viewing in bright environ-
ments and maintains top resolution through the use of 
active-matrix technology. 

1. Press the latch located at the top of the display panel. 

This releases the locking mechanism and raises
the display slightly.

2. Lift the display backwards, being careful not to 

touch the screen, until it is at a comfortable
viewing angle. (Figure 3-2)

Once you have turned on your notebook, you may want 
to adjust the brightness level of the screen to a more 
comfortable viewing level. There are two ways to adjust 
the brightness keyboard and power management utility 

■

[FN+F6]: Pressing repeatedly will lower the
brightness of your display.

■

[FN+F7]: Pressing repeatedly will increase the
brightness of the display.

1. Double-click on the PMSet icon in the lower right 

corner of your display.

2. Slide the brightness control bar to the right to 

increase brightness or left to decrease brightness.

You may need to readjust the brightness level periodi-
cally depending on your operating environment. 

1. Holding the edge of your display panel, pull

it forward until it is flush with the body of
your notebook. 

2. Push down until you hear a click. This will

engage the locking mechanism and prevent
your display panel from opening unexpectedly.

Display Panel Latch

If using AC power your brightness setting is set to it’s 
highest level by default. If using battery power your 
brightness settings is set to it’s lowest level by default.

The higher the brightness level, the more power the 
notebook will consume and the faster your batteries
will discharge. For maximum battery life, make sure 
that the brightness is set as low as possible.