Made By Humans E Series ユーザーガイド

4. Push the card into the slot firmly until it is seated 

in the opening. You will hear a click and the Eject 
button will pop away from your notebook.

5. Flip the Eject button towards the front of

your notebook. 

6. Lock the PC Card into the slot by sliding the

Lock button toward the front of your notebook.

To remove a PC Card, follow these easy steps:

1. See your PC Card manual for specific instructions 

on removing your card. Some PC Cards may require 
your notebook to be Off while removing them.

2. Unlock the PC Card from the slot by sliding the 

Lock button toward the rear of your notebook. 

3. Flip the Eject button towards the rear of your note-

book until it is fully extended, and then push it in 
until it is flush with the notebook. This will push the 
PC Card slightly out of the slot allowing you to 
remove the card.

Windows has a shutdown procedure for PC Cards
that must be followed before removing a card.
(Please review your operating system manual for
the correct procedure)

If the dialog box states that the device cannot be 
removed, you must save all of your open files, close
any open applications and shutdown your notebook. 
Once your notebook has been shutdown, you must 
turn Off the power using the power switch.

If the PC Card has an external connector and cable, do 
not pull the cable when removing the card.