Infocus IN5110 QR80421 ユーザーズマニュアル

Displaying a video image

Remove the lens cap.

Press the power switch on the back of the projector to the on (I) position.

The Power light on the Status Indicator Panel (page 15) lights green.

Press the Power button on the top of the projector or the remote.

The Power light blinks green and the fans start to run. When the lamp

comes on, the startup screen is displayed and the light is steady green. It can

take a minute for the image to achieve full brightness.

? No startup screen?

Plug in and turn on the video device.

The video device’s image should appear on the projection screen. If it

doesn’t, press the Source button on the keypad or remote.

Adjust the height of the projector, if necessary, by pressing the release but-

tons on each side of the projector’s front to extend the elevator feet. Rotate

the feet, if necessary, to level the projector.

Position the projector the desired distance from the screen at a 90 degree

angle to the screen. See page 41 for a table listing screen sizes and distances

to the screen.

remove lens cap

press Power button

press Power switch

turn on video device

adjust height

elevator

foot

elevator

foot

release

button

release

button

adjust distance