ICOM iPCR100 ユーザーズマニュアル
7
2
PANEL DESCRIPTION
!1
CLOSE BUTTON
Push to quit and exit this software.
Push to quit and exit this software.
!2
ATTENUATOR BUTTON [ATT] (p. 21)
Push to turn the 20 dB attenuator on and off.
Push to turn the 20 dB attenuator on and off.
!3
VOLUME CONTROL [VOLUME] (p. 16)
Adjusts the audio output.
Adjusts the audio output.
• Right-click* to increase the volume level; left-click* to decrease
the volume level.
!4
AUTOMATIC NOISE LIMITER BUTTON [ANL] (p. 21)
Push to turn the automatic noise limiter for receiving AM
signals on and off.
Push to turn the automatic noise limiter for receiving AM
signals on and off.
!5
SQUELCH CONTROL [SQUELCH] (p. 20)
Adjusts the squelch threshold level. The squelch removes
noise output from the speaker (closed condition) when no
signal is received.
Adjusts the squelch threshold level. The squelch removes
noise output from the speaker (closed condition) when no
signal is received.
• Right-click* to increase the squelch level; left-click* to decrease
the squelch level.
!6
TONE SQUELCH BUTTON [T-SQL] (p. 36)
Push to show or hide the [TONE SQUELCH] dialog box for
setting tone squelch frequencies.
Push to show or hide the [TONE SQUELCH] dialog box for
setting tone squelch frequencies.
!7
RECEIVE MODE BUTTONS [FM], [WFM], [AM], [AUT-M]
(pgs. 18, 19)
Select a receive mode. The [AUT-M] button, automatic
mode, selects a previously programmed receive mode au-
tomatically depending on a receive frequency.
(pgs. 18, 19)
Select a receive mode. The [AUT-M] button, automatic
mode, selects a previously programmed receive mode au-
tomatically depending on a receive frequency.
!8
SCAN SPEED CONTROL [SPEED] (p. 33)
Sets the speed at which scans search through frequen-
cies/memories for signals.
Sets the speed at which scans search through frequen-
cies/memories for signals.
• Right-click* to increase the speed; left-click* to decrease the
speed.
!9
SCAN DELAY TIME CONTROL [DELAY] (p. 32)
Sets the period in which a scan pauses after receiving a
signal.
Sets the period in which a scan pauses after receiving a
signal.
• Right-click* to increase the period; left-click* to decrease the pe-
riod.
@0
TUNING STEP UP/DOWN BUTTONS [TS
J
]/[TS
K
]
(p. 18)
Push to select the tuning steps.
Push to select the tuning steps.
@1
TUNING DIAL (p. 17)
Push to set the receive frequency with the selected tuning
step.
Push to set the receive frequency with the selected tuning
step.
• Right-click* to increase the frequency; left-click* to decrease the
frequency.
@2
MEMORY BANK UP/DOWN BUTTONS
[BANK
[BANK
∧
]/[BANK
∨
] (p. 23)
Push to select the memory bank.
@3
MEMORY CHANNEL UP/DOWN BUTTONS
[CH
[CH
∧
]/[CH
∨
] (p. 23)
Push to select the memory channel.
* When the mouse property is set for right-handed.