Hughes AN6-098P ユーザーズマニュアル
Chapter 4 • Installing a J-type radio assembly
1037312-0001 Revision A
33
Figure 24 illustrates the difference between the horizontal
shim and vertical shim. Note the positions of the alignment
pins.
shim and vertical shim. Note the positions of the alignment
pins.
4. Remove the horizontal shim and O-ring.
Figure 24: Horizontal shim and vertical shim for transmit polarization
TRIA
Horizontal shim in place
Vertical shim in place
(In this photograph, the TRIA
has not yet been rotated.)
Alignment
pins
O-ring
Horizontal shim
Vertical shim
Alignment
pins
X here identifies horizontal shim. This X
is visible when the parts are assembled.
“ – ” mark here identifies vertical shim. This
mark is visible when the parts are assembled.
mark is visible when the parts are assembled.