Hitachi SH-G1000 ユーザーズマニュアル

ページ / 264
232 4A: Safety
users from radiation with making false and unsubstantiated claims. 
According to FTC, these defendants lacked a reasonable basis to 
substantiate their claim.
10. What are wireless telephone base stations?
Fixed antennas used for wireless telecommunications are referred to as 
cellular base stations, cell stations, PCS (“Personal Communications 
Service”) stations or telephone transmission towers. These base stations 
consist of antennas and electronic equipment. Because the antennas 
need to be high in the air, they are often located on towers, poles, water 
tanks, or rooftops. Typical heights for freestanding base station towers are 
50-200 feet. 
Some base stations use antennas that look like poles, 10 to 15 feet in 
length, that are referred to as “omni-directional” antennas. These types 
of antennas are usually found in rural areas. In urban and suburban 
areas, wireless providers now more commonly use panel or sector 
antennas for their base stations. These antennas consist of rectangular 
panels, about 1 by 4 feet in dimension. The antennas are usually 
arranged in three groups of three antennas each. One antenna in each 
group is used to transmit signals to wireless phones, and the other two 
antennas in each group are used to receive signals from wireless phones.
At any base station site, the amount of RF energy produced depends on 
the number of radio channels (transmitters) per antenna and the power 
of each transmitter. Typically, 21 channels per antenna sector are 
available. For a typical cell site using sector antennas, each of the three 
transmitting antennas could be connected to up to 21 transmitters for a 
total of 63 transmitters. However, it is unlikely that all of the transmitters 
would be transmitting at the same time. When omni-directional 
antennas are used, a cellular base station could theoretically use up to 96 
transmitters, but this would be very unusual, and, once again, it is 
unlikely that all transmitters would be in operation simultaneously. Base 
stations used for PCS communications generally require fewer 
transmitters than those used for cellular radio transmissions, since PCS 
carriers usually have a higher density of base station antenna sites.