CMS Products 676 ユーザーズマニュアル

HotCup Operators’ Guide

Hot Drink Setup

November, 2007

6740001

VIEW OR SET THE HOT WATER TANK TEMPERATURE

a. Press

then

until the display shows

SET 202

. In this example, 202° is the

water tank temperature setpoint in degrees Fahrenheit. If a decimal point appears next to the
“F”, the heater is on.

b. If desired, enter a new setpoint in the accepted range of 149° - 205° F (65° - 96° C).

NOTE

The lower limit for vending is 20° below setpoint, up to a

maximum of 180° F (82° C).

c. To change display units (replace the “F” with a “C” for Celsius), press

d. Continue.

SET UP LOW TEMPERATURE DISPENSING

a. Press

then press

until the screen displays either:

LTDIS off

. This causes the machine to operate the same as the previous HotCup Center.

For example, with a setpoint temperature of 202º F the machine will inhibit vending when the
water tank temperature reaches 182º F.

-or-

ltdis on

. Allows vending to a water tank temperature of 140º F.

b. Press

to change between ON and OFF.

c. Continue.