Canon DP-V3010 取り扱いマニュアル
50
OSD Menu
System Settings
This menu is used to set the settings related to the main unit and display controller system.
Item
Setting Options (underline indicates factory default)
Network
Sets the main unit and display controller network settings.
Configure an IP
Address
Address
Automatic: Configures an IP address automatically with DHCP/Automatic IP.
Manual: Configure an IP address and subnet mask manually.
Manual: Configure an IP address and subnet mask manually.
Display
192.168.0.1
Display
Controller
Controller
192.168.0.10
Subnet Mask
255.255.255.0
Language
Sets the language of the OSD menu and messages.
English,
English,
,
Display Function
Sets the function to assign to the F buttons of the main unit. Select an F button and assign a
function from the following list. The factory defaults for the main unit F buttons is as follow:
F1 :
function from the following list. The factory defaults for the main unit F buttons is as follow:
F1 :
Channel UP
F2 :
Channel DOWN
F3 :
Time Code (On, Off)
F4 :
Aspect Marker (On, Off)
The following functions can also be assigned:
Monochrome/Blue Only/Red Off/Green Off/Blue Off (On, Off)
Backlight Control(Local Dimming (High, Middle, Low), Global Dimming, Off)
Screen Scaling (Native Input Resolution, 200%, Automatic)
H Delay (On, Off)
V Delay (On, Off)
Backlight Scan (On, Off)
Safety Zone Marker 1, 2 (On, Off)
Center Marker (On, Off)
Grid Marker (On, Off)
Show OSD (On, Off)
Knob Lock (On, Off)
CDL Override (On, Off)
CDL Save to Memory
CDL Load from Memory
CDL Export/Import
Peaking (Peaking 1/Peaking 2/Off)
Monochrome/Blue Only/Red Off/Green Off/Blue Off (On, Off)
Backlight Control(Local Dimming (High, Middle, Low), Global Dimming, Off)
Screen Scaling (Native Input Resolution, 200%, Automatic)
H Delay (On, Off)
V Delay (On, Off)
Backlight Scan (On, Off)
Safety Zone Marker 1, 2 (On, Off)
Center Marker (On, Off)
Grid Marker (On, Off)
Show OSD (On, Off)
Knob Lock (On, Off)
CDL Override (On, Off)
CDL Save to Memory
CDL Load from Memory
CDL Export/Import
Peaking (Peaking 1/Peaking 2/Off)
Note
• When changing channels with "Channel UP/DOWN", the channels with "Input Configuration"
(
40) set to "–" are skipped.
• When the "Backlight Control" setting is switched using an F button, the information is applied
to "Backlight Control" in "Picture Mode". Likewise, when any marker settings are changed,
those changes will be applied to "Enable" under the currently selected "Marker Preset".
those changes will be applied to "Enable" under the currently selected "Marker Preset".
COP
Y