Sony RM-VLZ620 操作ガイド

RM-VLZ620_U (US) 4-170-639-12(1)

If the setting is incomplete, the SET indicator 

flashes once and the indicators turn off. Start 

again from the beginning.

If you enter a manufacturer’s code that is not 

listed in the supplied “Manufacturer’s Code 

List,” the setting will be canceled.

  Press the Device Select button for 

the device you want to operate.

The Device Select button flashes.

  Press POWER to turn on the 

device.

  Press any button to control the 

device.

See “Table of Preset Functions” 

(page 36) for the functions of 

buttons for each device.

 First, try repeating the setup procedure 

using another manufacturer’s code (if 

listed for your device).

 Try setting the code number using the 

Search function (page 15).

 The remote control signals may be 

different for some devices or functions. In 

this case, teach the remote control 

appropriate signals to the RM-VLZ620 

(page 20).

You can reset the code of any Device 

Select button to its factory setting.

  Press and hold SET for more than 

3 seconds.

The SET indicator lights up.

While keeping SET held down, 

press  .

  Enter  - 0 - 2.

The SET indicator flashes three 

times.

  Press the Device Select button 

you want to reset.

The SET indicator flashes three 

times and the indicators turn off.

To cancel the process, press SET 

anytime.
Notes

 When you reset a Device Select button, the 

learned function or programmed 

consecutive procedure will also be cleared 

from the button.

 To clear all the settings of the RM-VLZ620, 

see page 32.