Raritan Computer Home Theater Server KX2101-v2.20-0B-E ユーザーズマニュアル
Chapter 6: Device Management
158
Diagram key
DKX2-101-SPDUC connector (not included)
from the KX II-101 to Raritan the power strip.
from the KX II-101 to Raritan the power strip.
Raritan power strip.
To connect the KX II-101 to a Raritan power strip:
1. Connect the Mini DIN9M connector of the DKX2-101-SPDUC cable
to the Admin port of the KX II-101.
2. Connect the RJ45M connector of the DKX2-101-SPDUC cable to the
serial port connector on the Raritan power strip.
3. Attach an AC power cord to the target server and an available power
strip outlet on the power strip.
4. Connect the power strip to an AC power source.
5. Power ON the Raritan power strip.
6. Click to Device Settings > Serial Port to open the Serial Port page.
7. Select the Power Strip Control radio button and click OK. Once this
is done, the Power menu is available on the Remote Console.
Naming the Power Strip (Port Page for Power Strips)
This Port page opens when you select a port, connected to a Raritan
remote power strip, from the Port Configuration page. The Type and the
Name fields are pre-populated. The following information is displayed for
each outlet in the power strip: outlet Number, Name, and Port
Association.
remote power strip, from the Port Configuration page. The Type and the
Name fields are pre-populated. The following information is displayed for
each outlet in the power strip: outlet Number, Name, and Port
Association.
Use this page to name the power strip and its outlets. All names can be
up to 32 alphanumeric characters and can include special characters.
up to 32 alphanumeric characters and can include special characters.
Note: When a power strip is associated to a target server (port), the
outlet name is replaced by the target server name (even if you assigned
another name to the outlet).
outlet name is replaced by the target server name (even if you assigned
another name to the outlet).
To name the power strip (and outlets):
Note: CommandCenter Service Gateway does not recognize power strip
names containing spaces.
names containing spaces.
1. Change the Name of the power strip to something you will
remember.
2. Change the (Outlet) Name if desired. (Outlet names default to Outlet
number.)