Raritan Computer Home Theater Server KX2101-v2.20-0B-E ユーザーズマニュアル
Chapter 2: Installation and Configuration
11
Resolutions
640x480 @66.6 Hz
800x600 @85 Hz
1152x870 @75.1 Hz
640x480 @72 Hz
800x600 @90 Hz
1152x900 @66 Hz
640x480 @75 Hz
800x600 @100 Hz
1152x900 @76 Hz
640x480 @85 Hz
832x624 @75.1 Hz
1280x960 @60 Hz
640x480 @90 Hz
1024x768 @60 Hz
1280x960 @85 Hz
640x480 @100 Hz
1024x768 @70 Hz
1280x1024 @60 Hz
640x480 @120 Hz
1024x768 @72 Hz
1280x1024 @75 Hz
720x400 @70 Hz
1024x768 @75 Hz
1280x1024 @85 Hz
720x400 @84 Hz
1024x768 @85 Hz
1600x1200 @60 Hz
Sun™ Video Resolution
Sun systems have two resolution settings, a command line resolution
and a GUI resolution. For information about the resolutions supported by
the KX II-101, see
and a GUI resolution. For information about the resolutions supported by
the KX II-101, see
Setting the Server Video Resolution
(on page 10).
Note: If none of the supported resolutions work, make sure the monitor is
multisync. Some monitors will not work with an H&V sync.
multisync. Some monitors will not work with an H&V sync.
Command Line Resolution
To check the command line resolution:
1.
Run the following command as the root: # eeprom output-device
To change the command line resolution:
1. Run the following command: # eeprom output-
device=screen:r1024x768x75 where 1024x768x75 is any resolution
that the KX II-101 supports.
that the KX II-101 supports.
2. Restart the computer.
GUI Resolution/32 Bit
To check the GUI resolution on 32 bit cards:
1. Run the following command: # /usr/sbin/pgxconfig –prconf
To change the GUI resolution on 32 bit cards:
1. Run the following command: # /usr/sbin/pgxconfig
–
res1024x768x75 where 1024x768x75 is any resolution that the KX II-
101 supports.
101 supports.
2. Restart the computer.