Zoom H2 ユーザーズマニュアル

   

To monitor the output of the H2 using a stereo 
system, connect a Y cable to the [PHONES/LINE 
OUT] jack (stereo mini phone jack) and adjust the 
volume with the VOLUME [+]/[-] keys.

To use an external microphone, 
connect the mic to the [EXT MIC IN] 
jack (stereo mini phone jack). Plug-in 
power type microphones are also 
supported (p.80).

To record the output signal of 
a CD player or similar, 
connect it to the [LINE IN] jack 
(stereo mini phone jack).

When the H2 is connected to a computer via 
the [USB] port (mini USB), it can be used as 
audio interface for the computer, and audio 
files stored on the SD card in the H2 can be 
transferred to the computer.

To monitor the output of the H2 
using headphones, connect the 
phones to the [PHONES/LINE 
OUT] jack (stereo mini phone jack) 
and adjust the volume with the 
VOLUME [+]/[-] keys.

To operate the H2 on AC power, be sure to 
use only the supplied AC adapter. Using a 
different adapter can lead to damage.

 

Make connections to other equipment such as microphones and audio components as shown below.

 

• To use the built-in mics, disconnect any equipment from the [EXT MIC IN] 

jack or [LINE IN] jack. If anything is connected to these jacks, the built-in 
mics are deactivated.

• If equipment is connected both to the [EXT MIC IN] jack and [LINE IN] 

jack, the [LINE IN] jack has priority.

H2-E.fm 10 ページ ２００７年７月１１日　水曜日　午後３時１９分