Zoom H2 ユーザーズマニュアル
Stereo Mode Recording
ZOOM H2
20
Setup example (2):
External mic
To use an external mic for recording, connect
the mic to the [EXT MIC IN] jack. If a mono
mic is used, only the left channel signal will
be recorded.
the mic to the [EXT MIC IN] jack. If a mono
mic is used, only the left channel signal will
be recorded.
Setup example (3):
External component
To record the signal of an external source
component such as a CD player, connect the
output of the component to the [LINE IN]
jack. Use the supplied Y cable or a cable with
a stereo mini phone plug at both ends. Note
that direct input of the signal from instruments
such as an electric guitar or bass is not
supported.
component such as a CD player, connect the
output of the component to the [LINE IN]
jack. Use the supplied Y cable or a cable with
a stereo mini phone plug at both ends. Note
that direct input of the signal from instruments
such as an electric guitar or bass is not
supported.
HINT
• If anything is plugged into the [EXT MIC IN]
jack or [LINE IN] jack, the built-in mics are
deactivated.
deactivated.
• If equipment is connected both to the [EXT
MIC IN] jack and [LINE IN] jack, the [LINE IN]
jack has priority.
jack has priority.
External mic
H2
[EXT MIC IN] jack
CD player
H2
[LINE IN] jack
Glossary
On-mic/Off-mic
On-mic refers to recordings made with the microphone close to the sound source, while off-mic is a
recording technique that puts more distance between sound source and microphone, to capture
ambience and room reverberations as well.
recording technique that puts more distance between sound source and microphone, to capture
ambience and room reverberations as well.
H2-E.fm 20 ページ ２００７年７月１１日 水曜日 午後３時１９分