Zoom H2 ユーザーズマニュアル

  

Shows the battery 
status.

Shows the playback time 
of the current file or the 
recording time in 
hours/minutes/seconds.

When repeat playback or auto 
record is active, the respective 
symbol is shown here.

Shows that the H2 is operating 
in 4-channel mode.

Normally, the name of the 
file pair that is played back 
is shown here. During 
recording standby and 
recording, the name of the 
file pair used for recording 
is shown.
In 4-channel mode, two 
WAV format files (one each 
for front and rear) are 
handled as a set. The 
indication "SRxxxF/R.WAV" 
(where xxx is a number 
from 000 to 499) refers to 
the front stereo file 
"SRxxxF.WAV" and rear 
stereo file "SRxxxR.WAV" 
pair.

Indicates the available time 
for recording, according to 
the currently selected 
recording mode (file 
format, quantization, 
sampling frequency).

Shows the current 
operation status of the 
recorder. There are five 
different indications for 
playback, pause, stop, 
recording standby, and 
recording.

Indicate the current input 
level or output level. At the 
rightmost end of the scale is 
a clip indicator which lights 
up when signal clipping 
(leading to distortion and 
sound breakup) occurs. If 
clipping has occurred at least 
once during playback or 
recording, the clip indicator 
remains lit until the end of 
playback/recording.

H2-E.fm 28 ページ ２００７年７月１１日　水曜日　午後３時１９分