Zoom H2 ユーザーズマニュアル

 

The A-B repeat function lets you specify two
points (A and B) in a file (or file pair for 4-
channel mode) and automatically repeat the
section between these points. To use this
function, proceed as follows.

 

The settings described here cannot be made 
while the recorder is operating. Stop recording 
or playback before carrying out these steps.

 

At the stereo mode or 4-channel mode top
screen, press the 

 

4

 

 (MENU) key.

 

Repeatedly press the 

 

3

 

 (REW)/

 

2

 

 (FF)

keys to move the cursor to "A-B REPEAT"
and press the 

 

5

 

 (REC) key.

The screen for specifying point A appears.

 

Use the 

 

3

 

 (REW)/

 

2

 

 (FF) keys to move the

counter to the point where you want the
repeated section to start (point A). Then press
the 

 

5

 

 (REC) key.

The screen for specifying point B appears.

 

Using the 

 

3

 

 (REW)/

 

2

 

 (FF) keys to move

the counter to the point where you want the
repeated section to end (point B). Then press
the 

 

5

 

 (REC) key.

 

• The A/B point setting can be made also 

while  in playback mode.

• You can also set point B at an earlier 

location than point A. In that case, the 
section from B to A is repeated.

 

When the A/B points have been set, press the

 

1

 

 (PLAY/PAUSE) key. The section A 

 

→

 

 B

(or B 

 

→

 

 A) is played back repeatedly.

 

When you press the 

 

5

 

 (REC) key once more,

repeat playback is canceled and the A/B point
settings are cleared.

 

Repeatedly press the 

 

4

 

 (MENU) key until

the top screen appears again.

H2-E.fm 46 ページ ２００７年７月１１日　水曜日　午後３時１９分