Zoom H2 ユーザーズマニュアル

 

Watch the indication on the screen while
tuning the instrument.

 

If the display does not respond to the playing 
of the instrument, check the input source 
selection (

 

→

 

 p. 18), mic pattern selection (

 

→

 

 p. 

21), and input sensitivity/recording level setting 
(

 

→

 

 p. 23).

 

Repeatedly press the 

 

4

 

 (MENU) key until

the stereo mode or 4-channel mode top screen
appears again.

 

B y   s e l e c t i n g   a   t u n e r   m o d e   o t h e r   t h a n
"CHROMATIC", you can perform tuning that
is tailored to special requirements for guitar or
bass. For these tuner modes, you specify each
string for tuning separately.
7-string guitar, 5-string bass and other
unconventional tunings are also supported.

 

• The steps described here cannot be 

performed while the recorder is operating. 
Stop recording or playback before carrying 
out these steps.

• Before starting the operation below, make 

sure that the correct signal source for the 
instrument to tune is selected. When using 
the built-in mics for tuning, make sure that a 
suitable mic pattern is selected.

 

At the stereo mode or 4-channel mode top
screen, press the 

 

4

 

 (MENU) key.

 

Repeatedly press the 

 

3

 

 (REW)/

 

2

 

 (FF)

keys to move the cursor to "TUNER" and
press the 

 

5

 

  (REC) key. The screen for

making tuner settings comes up.

 

M o v e   t h e   c u r s o r   t o   a   m o d e   o t h e r   t h a n
"CHROMATIC" and press the 

 

5

 

 (REC) key.

You can select "GUITAR" (standard guitar
tuning), "BASS" (standard bass tuning), or
special guitar tuning.
In tuner modes other than "CHROMATIC",

H2-E.fm 64 ページ ２００７年７月１１日　水曜日　午後３時１９分