Zhone 08-01002-01 ユーザーズマニュアル
1-8 Installing the Elite Modem
Revision 2.01
Elite Modem Installation Guide
08-01002-01
Task:
Installing the Desk Mount Filter
Installing the Desk Mount Filter
It is important that the telephone filters be installed correctly. Follow these
instructions precisely. If the telephone filter is installed incorrectly (reversed),
the filter will not allow voice signals to pass. (See Figure 1-1, Desk Mount
Filter Connections.)
instructions precisely. If the telephone filter is installed incorrectly (reversed),
the filter will not allow voice signals to pass. (See Figure 1-1, Desk Mount
Filter Connections.)
Step Action
1
Check for a dial tone.
2
Disconnect the telephone line cord from the wall jack and insert it into the jack
on the filter identified with this telephone icon:
on the filter identified with this telephone icon:
3
A 7-foot RJ-11 telephone line cord is supplied with the filter. Connect one end
of the line cord into the jack on the filter identified with this icon:
of the line cord into the jack on the filter identified with this icon:
4
Plug the other end of the 7-foot line cord into the wall jack.
5
Verify that ther is a dial tone. If a dial tone is not present, check all
connections.
connections.
Figure 1-1. Desk Mount Filter Connections
STOP
You have completed this task.