Viewsonic NexTV VMP71 ユーザーズマニュアル

21 

Browse shared network volumes via SAMBA protocol when this device is connected to 

network. 

Browse media files in a UPnP AV MediaServer in the same LAN with this device. 

1.  Select a location to browse for the media file you want to play. Select HDD if the file is 

saved on the internal HDD or USB if the file is located on an external USB device 

connected to this device. 

2.  Browse to the folder containing the media file you want to play (use the cursor buttons 

on the remote control to navigate through listed folders; press the 

  ENTER button 

to open a folder or subfolder). 

3.  Select a media file and press the 

  ENTER button to start playback. 

You can use this device to play media files from your network on your TV. 

1.  Connect this device to your home network. 

2.  From the Home Menu, select NET and press the 

  ENTER button. 

3.  The NET menu will show volumes available on your network. Use the cursor buttons on 

the remote control to browse and to select media files you want to play. 

 Note:

 

If you need to enter a username and password to login to a network volume, 

press the 

  ENTER button on the remote control. This will bring up a 

virtual keyboard on the TV display. Use the remote control cursor buttons and 

the 

  ENTER button to select the necessary characters. The password can 

use any combination of numbers and letters (lower case or caps). It can also 

use periods. It cannot use extended punctuation characters (such as !, @, #, $, 

%, &, etc.) 

1.  Select the image file you want to start the slideshow, then press the 

  ENTER 

button. This device will display all photo images in the folder consecutively with the 

selected display interval. 

2.  To set the display interval for your slideshow, select Setup in the Home Menu to 

access the Setup Menu. Select Misc 

→ Slideshow Interval, and select the time you 

want each photo to display. (page 23) 

903