Venturer SHD7000 ユーザーズマニュアル
- 14 -
SETUP
• HDMI output is digital only. DVI analog is not supported.
• HDMI is an evolving technology, so some devices may not operate properly with this player.
• To get the most possible benefit from Dolby Digital Plus, you should connect your HD DVD player to
your AV receiver using its HDMI input. If your AV receiver has this type of input, make sure it is
connected to your HD DVD player and that the input is set to use audio from HDMI (and not the SPDIF
coaxial or optical input). If your AV receiver does not have an HDMI input, then the next best choice is
to use the SPDIF (coaxial or optical) input on your AV receiver.
connected to your HD DVD player and that the input is set to use audio from HDMI (and not the SPDIF
coaxial or optical input). If your AV receiver does not have an HDMI input, then the next best choice is
to use the SPDIF (coaxial or optical) input on your AV receiver.
• If you use the SPDIF optical output or analog outputs to connect your audio system and have the
“Digital Out HDMI” set to “Auto” or “PCM”, the audio output level from these jacks will be reduced when
listening to a multi-channel disc. To restore the audio output level, set “Digital Out HDMI” to “Downmixed
PCM”.
listening to a multi-channel disc. To restore the audio output level, set “Digital Out HDMI” to “Downmixed
PCM”.
Via Component Video Input
Some discs may be down converted or require HDMI connection.
Using a component video cable (not supplied), connect the Y VIDEO OUT jack (green plug) on your unit
to the Y VIDEO IN jack on your TV, the P
Some discs may be down converted or require HDMI connection.
Using a component video cable (not supplied), connect the Y VIDEO OUT jack (green plug) on your unit
to the Y VIDEO IN jack on your TV, the P
B
VIDEO OUT jack (blue plug) on your unit to the P
B
VIDEO IN
jack on your TV and the P
R
VIDEO OUT jack (red plug) on your unit to the P
R
VIDEO IN jack on your TV.
To use the optical digital output, use an
optical cable to connect this jack to an
optical audio input on a device capable of
processing a DTS bitstream or PCM audio
(see “Connecting to an Audio System”).
optical cable to connect this jack to an
optical audio input on a device capable of
processing a DTS bitstream or PCM audio
(see “Connecting to an Audio System”).
To use the analog sound output, connect
these ANALOG AUDIO OUTPUT jacks to
audio input jacks on your TV using the audio
cable.
these ANALOG AUDIO OUTPUT jacks to
audio input jacks on your TV using the audio
cable.
RCA Audio/Video Cable
Use the Audio/Video cable (not supplied).
Connect the VIDEO OUT and left/right AUDIO
OUT jacks on the unit to the VIDEO IN and left/
right AUDIO IN jacks on your TV.
Use the Audio/Video cable (not supplied).
Connect the VIDEO OUT and left/right AUDIO
OUT jacks on the unit to the VIDEO IN and left/
right AUDIO IN jacks on your TV.
480i output only regardless
of the resolution settings or
the connections of other
output jack.
of the resolution settings or
the connections of other
output jack.
AUDIO IN
L
R
TV
Audio/Video cable
(not supplied)
Red
White
Y
P /C
P /C
B
B
R
R
VIDEO
IN
Component video cable
(not supplied)
(not supplied)
HDMI OUTPUT
COMPONENT
VIDEO OUTPUT
VIDEO OUTPUT
ANALOG AUDIO
OUTPUT
BITSTREAM
/PCM
OPTICAL
DIGITAL AUDIO OUTPUT
LAN
L
R
P
R
P
B
Y
AUDIO IN
R
L
VIDEO IN
Yellow
Audio/Video cable (not supplied)
Red
White
White
Yellow
TV
Red
HDMI OUTPUT
COMPONENT
VIDEO OUTPUT
VIDEO OUTPUT
ANALOG AUDIO
OUTPUT
BITSTREAM
/PCM
OPTICAL
DIGITAL AUDIO OUTPUT
LAN
L
R
P
R
P
B
Y