Vertical Communications SCS 8324F ユーザーズマニュアル
rogramming
GCA70-245
64
Comdial
August, 03
6.4.1 RESPONSE MESSAGE BUTTON
Response messaging allows you to reply in a non-verbal manner to a
voice announce or tone-signaled intercom call or to a subdued off-
hook voice announce call if the intercom caller is using an LCD
speakerphone. You can press a programmable button in response to
an intercom call and send a message to be shown on the display of the
calling station.
voice announce or tone-signaled intercom call or to a subdued off-
hook voice announce call if the intercom caller is using an LCD
speakerphone. You can press a programmable button in response to
an intercom call and send a message to be shown on the display of the
calling station.
• To assign a button for nonverbal response:
1. PRESS INTERCOM AND DIAL **1.
2. PRESS the programmable button you want to use for message access.
3. DIAL 5.
4. DIAL a message number (0 through 9).
2. PRESS the programmable button you want to use for message access.
3. DIAL 5.
4. DIAL a message number (0 through 9).
5. PRESS SPEAKER to end.
6.4.2 TRANSFER BUTTON
This program lets you set up a button to be used for transferring to a
third party. Most often, this feature is used for transferring calls you
wish to retain to voice mail.
third party. Most often, this feature is used for transferring calls you
wish to retain to voice mail.
• To assign a “transfer to voice mail” button:
1. PRESS INTERCOM AND DIAL **1.
2. PRESS the programmable button you want to use.
3. DIAL 6.
4. DIAL extension number.
5. PRESS SPEAKER to end.
2. PRESS the programmable button you want to use.
3. DIAL 6.
4. DIAL extension number.
5. PRESS SPEAKER to end.
NOTE: Programmed messages available for use are created by
you, the system attendant and are listed in a table on page 93.
you, the system attendant and are listed in a table on page 93.