Verilux 41TDM プリント
Specifications
Network Interface
Service Type:
DDS-I or DDS-II clear
channel
channel
Operating Modes: Full duplex, point-to-point,
multi-point
Line Rate:
56 and 72 kbps
Loop Range:
Up to 45 dB of loss
Line Connection:
RJ-48C jack, 8-pin
modular
modular
Timing Source:
DDS-I: Network, Internal
DDS-II: Network
DDS-II: Network
Antistream Timer: Off, 10, 30, or 60 seconds
Supervisory Port
Connection:
8 - pin modular (RS-232)
Data Rates:
1.2, 2.4, 9.6, and 19.2 kbps
SLIP Port
Connection:
8 - pin modular (RS-232)
Data Rates:
1.2, 2.4, 9.6, and 19.2 kbps
Ethernet (option)
Connection:
8 - pin modular
Network Protocol: TCP / IP-based networks
Data Rate:
10 Mbps
Compatibility:
10BASE - T, ISO/IEC
8802-3
8802-3
Token Ring (option)
Connection:
8 - pin modular (RJ-45)
Network Protocol: TCP / IP based networks
Data Rate:
4 or 16 Mbps
Compatibility:
Type 3 UTP, ISO/IEC
8802-5
8802-5
Dial Backup
Connection:
6-pin modular
Backup Service:
ISDN, sync
Configuration:
Information for backup
unit is stored in unit and
transmitted to backup unit
by inband AT commands.
unit is stored in unit and
transmitted to backup unit
by inband AT commands.
Dialing:
Numbers programmed and
stored in unit and
transmitted to backup unit
by inband AT commands.
stored in unit and
transmitted to backup unit
by inband AT commands.
Restoral:
Manual or automatic restoral
to leased line service
to leased line service
Diagnostics
Loopbacks:
V.54 (send and receive),
alternating loop (DDS-I),
latching loop (DDS-II)
alternating loop (DDS-I),
latching loop (DDS-II)
BERT:
511 pattern
Alarms
Activation:
Programmable thresholds
Reporting:
Front panel LEDs, call out
on alarm (COA), SNMP
TRAPs
on alarm (COA), SNMP
TRAPs
Power
115 VAC:
116 mA, 8 W max,
27 BTU max
27 BTU max
Mechanical
Housing:
Plastic standalone case
Mounting:
Desktop or horizontal rack
Dimensions:
12 inches (30.40 cm) wide
2 inches (5.08 cm) high
9 inches (22.86 cm) deep
2 inches (5.08 cm) high
9 inches (22.86 cm) deep
Weight:
4 pounds (1.814 kg)
Environmental
Storage Temp:
32
°
to 122
°
F (0
°
to 50
°
C)
Operating Temp:
−
4
°
to 185
°
F (
−
20
°
to 85
°
C)
Humidity:
95% maximum (non -
condensing)
Compatibility
TR 62310:
November 1987
TR 62310A:
December 1989
(addendum 3)
(addendum 3)
TR 41450:
November 1981
Internet Standards: RFC 1157 (SNMP)
RFC 1155 (SMI)
RFC 1213 (MIB-II)
RFC 1055 (SLIP)
Enterprise TXPORT MIB
Enterprise DDS MIB
RFC 1213 (MIB-II)
RFC 1055 (SLIP)
Enterprise TXPORT MIB
Enterprise DDS MIB
DDS -I Port Data Rates
Standard mode
Port A:
Sync onlyat 56 kbps
Port B:
Inactive
Proprietary, non-TDM mode
Port A:
Sync at 2.4, 4.8, 9.6, 19.2,
38.4, or 52 kbps
38.4, or 52 kbps
Async at 2.4, 4.8, 9.6,
19.2, 38.4, or 57.6 kbps
19.2, 38.4, or 57.6 kbps
Port B:
Inactive
Proprietary, TDM mode
Port A:
Sync at 2.4, 4.8, 9.6, 19.2,
or 31.2
or 31.2
*
kbps
Async at 2.4, 4.8, 9.6,
19.2, or 31.2
19.2, or 31.2
*
kbps
Port B:
Sync at 2.4, 4.8, 9.6, 19.2,
or 31.2
or 31.2
*
kbps
Async at 2.4, 4.8, 9.6,
19.2, or 31.2
19.2, or 31.2
*
kbps
*
Only one port can be set for 31.2 kbps at a
time. If Port A is set to 31.2 kbps, Port B is lim-
ited to 19.2 kbps. If Port B is set it 31.2 kbps,
Port A is limited to 19.2 kbps.
ited to 19.2 kbps. If Port B is set it 31.2 kbps,
Port A is limited to 19.2 kbps.
DDS -II Port Data Rates
Standard mode
Port A:
Sync only at 64 kbps
Port B:
Inactive
Proprietary, non-TDM mode
Port A:
Sync at 2.4, 4.8, 9.6, 19.2,
38.4, 56, 60 kbps
38.4, 56, 60 kbps
Async: at 2.4, 4.8, 9.6,
19.2, 38.4, 56, 57.6 kbps
19.2, 38.4, 56, 57.6 kbps
Port B:
Inactive
Proprietary, TDM mode
Port A:
Sync at 2.4, 4.8, 9.6, 19.2,
or 38.4
or 38.4
*
kbps
Async at 2.4, 4.8, 9.6,
19.2, or 38.4
19.2, or 38.4
*
kbps
Port B:
Sync at 2.4, 4.8, 9.6, 19.2,
or 38.4
or 38.4
*
kbps
Async at 2.4, 4.8, 9.6,
19.2, or 38.4
19.2, or 38.4
*
kbps
*
Only one port can be set for 38.4 kbps at a
time. If Port A is set to 38.4 kbps, Port B is lim-
ited to 19.2 kbps. If Port B is set it 38.4 kbps,
Port A is limited to 19.2 kbps.
ited to 19.2 kbps. If Port B is set it 38.4 kbps,
Port A is limited to 19.2 kbps.
Connections
SUPV/SLIP and DDS Pinout
Port A and Port B Pinouts
Pin SUPV/SLIP
DDS
1
DTR Out
Data Out (Tip)
2
RTS Out
Data Out (Ring)
3
Frame Gnd
4
Data Out
5
Data In
6
Signal Gnd
7
CTS In
Data In (Tip)
8
DCD In
Data In (Ring)
ITU Ckt Name
V.35
RS-232 EIA-530 DCE
101/AA
Frm Gnd
A
1
1
Gnd
102/AB
Sgnl Gnd B
7
7
Gnd
103/BA
TxD
P, S
2
2, 14
In
104/BB
RxD
R, T
3
3, 16
Out
105/CA
RTS
C
4
4, 19
In
106/CB
CTS
D
5
5, 13
Out
107/CC
DSR
E
6
6, 22
Out
108/CD
DTR
H
20
20, 23
In
109/CF
DCD
F
8
8, 10
Out
114/DB
TC
Y, AA 15
12, 15
Out
115/DD
RC
V, X
17
9, 17
Out
141/LLB LL
18
18
In
140/RLB RL
21
21
In
142/TM Test Mode
25
Out
45-00129
4.0
41TDM
Configuration Guide
SCROLL
EXIT
SELECT
TDM
TEST ALARM POWER
PRISM 41TDM
T
R
A
N
S
P
O
R
T
®
LAN
SLIP
SUPV
DDS
DBU
PORT A
PORT B
115VAC
50/60Hz
50/60Hz
116ma