Rigid Industries Automatic Pipe and Bolt Threading Machine 535-A ユーザーズマニュアル

1. At a standard size thread setting, remove set screw at

base of guide post and pull post through die head.

2. For tapered threads, insert guide post with the diag-

onal slot inward through die head. Guide block will
engage diagonal slot and post will rotate toward
gear case.

3. For straight threads, insert guide post with straight slot

inward through die head to the gear case.

4. With guide block in diagonal/straight slot, replace

set screw.

14

1. Remove stop screw.

2. Pull Knobs and rotate cam plate to CD mark.

3. Remove Die #1 and insert new Die #1 (repeat).

4. Rotate cam plate to size.

5. Replace stop screw.

NOTE! If it becomes necessary to remove or replace

the guide block, the stamped number E-1997 on
guide block must be AGAINST selector plate. If
number is visible you will cut an UNDERSIZE
thread.

Mounting No. 141 Geared Threader on machine requires
a Carriage Mount Kit. The kit includes a carriage saddle,
carriage connecting link, reversing drive shaft and oil
routing manifold. The machine must be in the FORWARD
operating mode for No. 141 Geared Threader operation.

1. Remove cutter, die head and reamer from machine.

2. Install carriage saddle.

3. Install oil manifold.