PROLINK Modem 9000 ユーザーズマニュアル

2 6

6.1. I can not get any connection. Power LED and LAN LED light
up, but  the ADSL Link LED  keeps  blinking .
1) Ensure that the ADSL line is activated.
2) Check that the Telephone cable (RJ-11) is connected  to LINE
      Jack on your router.
3) Try to turn off the modem, wait for at lease ten seconds, then
turn on again.

If the problem still persists, please check with your ADSL Service
Provider to confirm the line condition.

1) Check whether you can get the IP from your Modem/

Router. (MS-DOS mode, type ipconfig to check your
computer’s IP, If it's not 10.0.0.X, try to type ipconfig/
renew)

2) Try to turn off the modem, wait for at lease ten seconds,

then turn on again.

3) Restart your PC for the IP Address to take effect and try to

ping again.

4)     Check the LAN LED whether it lights up. If not, check the

cable connection.(if using USB, LAN LED has no light)

1) You may have to disable the proxy settings on your

Internet browser.

2) Make sure that your browser is set to connect directly .

A. For Internet Explorer, click Tools, Internet Options, and then
the Connection tab.  Make sure that Internet Explorer is set to
Never dial a connection.

B. For Netscape Navigator, click Edit, Preferences, Advanced,
and Proxy. Make sure that Netscape Navigator is set to Direct
connection to the Internet.

      Section Six: Troubleshooting and FAQs