POSIFLEX Business Machines 16280900030 ユーザーズマニュアル

 

 

Part 18

make sure that the software application has the ability to power off the 
machine. In preloaded Windows, “Posiflex Power Switch Manager” in 
“Posiflex Tools” in the Program Files helps managing these functions. 

The Jiva series provides a software power off for application program 

maneuvers as mentioned above. The Jiva also provides a specific means for the 
software to detect if the system is working on external or UPS battery power. 
So the compatible software applications have the ability to change operating 
conditions when running on standard/backup power. The software programmer 
may take reference from the Jiva technical manual to apply such features. 

The system may also turn on according to some preset conditions 

such as Modem Ring Up or Alarm Clock Wake Up or LAN Wake Up. 

To utilize Modem Ring Up or Alarm Clock Wake Up function, please 

enter the CMOS setup, “Power Management Setup”, “PM Wake Up Events” 
and enable the “Ring Power Up Control” or “Power Up by Alarm”. Save the 
configuration and exit the CMOS setup program.  For LAN wakeup, an 
operating caller system connected through LAN to the system is required. It 
also requires a qualified networking technician to check the LAN chip ID of 
the system for the caller system to wake up. 

When the  Jiva system is turned off after a successful boot up, the 

preset automatic power on functions will turn on the system when the preset 
conditions are met. But if the Jiva system is improperly turned off before a 
complete boot up procedure, the above preset power on control functions will 
be disabled until next turning off after a complete boot up. 

For best viewing result please set your display resolution at 1024 x 

768 with high color. 

In configuration of system memory, max. 64 MB can be shared as the 

video memory. 

The VGA port in the Jiva system supports Posiflex stand alone touch 

or LCD  monitors like  TM-4115,  LM-6212 or TM-7112 if there is no base 
mount 2

nd

 LCD display. This port supports extended mode dual display 

function  in WinXP. To support the DC power to these Posiflex monitor, use 
the DC adaptor for TM-4115 / TM-7112. Connect the adaptor to VGA cable or 
use Posiflex VGA + power cable and set an internal jumper in the main unit to