Peugeot ELYSEO 125 ユーザーズマニュアル

Starting the engine

- With the electric starter

For safety reasons :

- Put the scooter on its central stand

The electric starter will not work unless you squeeze the left
brake lever.
To start the engine :

- Turn the ignition key to the position
- Squeeze the brake lever
- Press the starter button
- Release the button when the engine starts

When the engine is cold, keep the throttle closed.

Precautions

Never run the engine in a closed room. Exhaust gases
contain carbon monoxide and toxic gases.

Stopping the engine and

parking

After stopping the scooter :

- Only turn off the ignition when the engine is at idling

speed

- Put the ignition key to
- Put the vehicle on its stand
- Remove the key to prevent risks of theft

- Parking on the stand

- Avoid driving or parking on easily inflammable

materials (eg : dry leaves, …)
The stand is fitted with a lever to park the scooter easily.

- Move to the left side of the scooter
- Hold the scooter by its handlebar and the grab handle

at the back of the saddle

- Push the stand lever with your right foot while pulling

the scooter backwards with the handlebars and the
saddle's grab handle

- Placing on side stand *

Bearing in mind that the isde stand is equipped with an
automatic lift mechanism, be careful when carrying out
different operations on the vehicle.

Caution

Make sure that the vehicle is stable on its stand so that it
cannot fall over and possibly cause any body wound or
any damage to the scooter.

* According to the model