Tyco Electronics MM102014V1 ユーザーズマニュアル

 

•  The default emergency and emergency-capable talk groups can be locked out only if 

they are NOT in an emergency state 

•  If a talk group is locked out and is subsequently changed to the currently selected 

talk group, the radio automatically unlocks it so the user can hear calls on the talk 
group. 

•  The radio may be configured so all talk groups are automatically locked out by 

default. In this case, they must be manually unlocked, if desired. 

•  When in Fixed Scan Mode, P1 and P2 groups cannot be locked out.  

1.  Use the ▲ or ▼ button to scroll through the menu until “LockOutMenu” appears in the bottom line 

of the display. The name of a talk group in the currently active profile will appear in the top line. See 
Figure 5-5. 

2.  Use the ◄ or ► buttons to scroll through the list of talk groups, if any, until the desired talk group for 

lock out appears in the top line of the display. 

3.  Press the Select button to lockout the displayed talk group. A cursor (<)  appears next to the talk 

group’s name. 

4.  Repeat steps 2 and 3, as needed, to lockout additional talk groups. 

The dwell display will re-appear a few seconds after button presses end. 

While scrolling through talk groups in the active profile, the only talk groups that appear in the 
“LockOutMenu” are those in the active profile. 

1.  Use the ▲ or ▼ button to scroll through the menu until “LockOutMenu” appears in the bottom line 

of the display. The name of a talk group in the currently active profile will appear in the top line. See 
Figure 5-5. 

2.  Use the ◄ or ► buttons to scroll through the list of talk groups, if any, until the talk group desired for 

unlocking appears in the top line of the display. A cursor (“<”) appears next to the name of a talk 
group that is currently locked out.