Oricom AMPLIFIED DIGITAL ANSWERING SYSTEM AM900 ユーザーズマニュアル

6

Example of Connecting the System

Connect to a phone 
wall socket. 

Adaptor plug (supplied)

Modular line cord not supplied.

Existing corded or 

cordless phone (not

supplied)

Depending on the type of phone and phone wall socket you have you may

need to purchase a different type of telephone line adaptor plug. These 

are available from electronics stores.
Warning. Use only the AC adaptor supplied with this product. Incorrect 

adaptor polarity or voltage can seriously damage the AM900 and or be 

dangerous.
AC adaptor part number #: S005CS0900030, Input: 100-240V, 50/60

Hz, Output: DC9V 300mA
1. Plug the AC adaptor into a power point.
2. Plug the small plug on the AC adaptor  into the socket on the rear of 

the answering system.

3. After initialisation, the display will show

 00 on the message counter.

Setting the day, time and Language

The answering system always saves the day of the week and the time of 

day with each recorded message so that you always know when callers 

left their messages however the time and day must be set correctly. 
If you want to enter the day, time and language for the first time or if you want to 

change a day and time that has already been set, please proceed as follows: 
1. Press and hold the 

SKIP button for 2 seconds. You will hear the day of 

the week. 

2. Press the 

SKIP button repeatedly until you hear the correct day of the 

week. 

Getting Started