Optima Company EL-1500 ユーザーズマニュアル
The information contained in this document is subject to change without notice.
Royal/Regal Optima ES-S M.G. – Rev. 0b (05/07)
Code No. 0816510
Maintenance Guide
OPTIMA
®
Sensor Activated Flushometers
The Sloan OPTIMA automatic electronic Flushometer relies on an infrared sensor
to detect a user and activate a flushing cycle. No physical contact with the
Flushometer surface is necessary, assuring sanitary protection. OPTIMA
Flushometers are ADA-compliant devices and are available in both Royal
to detect a user and activate a flushing cycle. No physical contact with the
Flushometer surface is necessary, assuring sanitary protection. OPTIMA
Flushometers are ADA-compliant devices and are available in both Royal
®
and
Regal
®
Flushometer models. These hardwire Flushometers require the use of 24
VAC Stepdown Transformers.
The Flushometer is triggered by means of a self-adaptive infrared sensor. A
flashing red indicator light identifies the presence of a target. After a detected
user moves out of the effective range of the sensor, a signal is sent to the
Flushometer Solenoid and, after appropriate arming and/or flush delays, the flush
cycle is initiated. When a unit is used intermittently, the Sentinel Flush feature
ensures a cleansing cycle at least once in any 24-hour period.
flashing red indicator light identifies the presence of a target. After a detected
user moves out of the effective range of the sensor, a signal is sent to the
Flushometer Solenoid and, after appropriate arming and/or flush delays, the flush
cycle is initiated. When a unit is used intermittently, the Sentinel Flush feature
ensures a cleansing cycle at least once in any 24-hour period.
NOTE: Sensor location and positioning is critical. Failure to properly position the
electrical box to the recommended plumbing rough-in dimensions will result in
improper installation and may impair product performance. All tradesmen
(plumbers, electricians, tile setters, etc.) involved in the installation of this product
must coordinate their work efforts to ensure proper product installation. Improper
installation may nullify the manufacturer’s warranty.
electrical box to the recommended plumbing rough-in dimensions will result in
improper installation and may impair product performance. All tradesmen
(plumbers, electricians, tile setters, etc.) involved in the installation of this product
must coordinate their work efforts to ensure proper product installation. Improper
installation may nullify the manufacturer’s warranty.
OPTIMA
®
Components:
EL-1500 Series Sensor
• Self-adaptive Sensor
• Flashing Red Light Indicator
• Replaceable Sensor Window
• Two-wire connection system
• Surface Mounted (optional)
Solenoid
• Non-Hold-Open integral Solenoid operator
Transformer
24 VAC Stepdown Transformer
• EL-154 for 120 VAC Electrical Supply (50/60 Hz)
• EL-342 for 220/240 VAC Electrical Supply (50/60 Hz)
Override Button
• Courtesy Flush
(available only on Water Closet installations)
(also available on Concealed Water Closet ES-SM)
Cover Plates
• Override Button Sensor Cover Plate
(Exposed and Concealed Water Closet installations)
• Solenoid Cover Plate
(Exposed Water Closet and Urinal installations)
• Urinal Sensor Cover Plate
(Concealed Urinal installations)
Wall Box Option
•
Stainless Steel or Polished Brass Surface Finish
•
Concealed installation
•
Vandal Resistant
LIMITED WARRANTY
Sloan Valve Company warrants its Flushometer Products to be made of first
class materials, free from defects of material or workmanship under normal
use and to perform the service for which they are intended in a thoroughly
reliable and efficient manner when properly installed and serviced, for a period
of three years (one year for special finishes) from date of purchase. During this
period, Sloan Valve Company will, at its option, repair or replace any part or
parts which prove to be thus defective if returned to Sloan Valve Company, at
customer’s cost, and this shall be the sole remedy available under this
warranty. No claims will be allowed for labor, transportation or other incidental
costs. This warranty extends only to persons or organizations who purchase
Sloan Valve Company’s products directly from Sloan Valve Company for
purpose of resale.
class materials, free from defects of material or workmanship under normal
use and to perform the service for which they are intended in a thoroughly
reliable and efficient manner when properly installed and serviced, for a period
of three years (one year for special finishes) from date of purchase. During this
period, Sloan Valve Company will, at its option, repair or replace any part or
parts which prove to be thus defective if returned to Sloan Valve Company, at
customer’s cost, and this shall be the sole remedy available under this
warranty. No claims will be allowed for labor, transportation or other incidental
costs. This warranty extends only to persons or organizations who purchase
Sloan Valve Company’s products directly from Sloan Valve Company for
purpose of resale.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION
ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY
RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE
WHATSOEVER.
ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY
RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE
WHATSOEVER.