Troy-Bilt CSV 060 Push Chipper Shredder Vac オーナーマニュアル

If the discharge area becomes clogged, remove the flail screen 

and clean area as follows:
1. 

Stop the engine. Make certain the chipper/shredder 

vacuum has come to a complete stop.

2. 

Before unclogging the discharge chute, disconnect and 

ground the spark plug wire to retaining post.

3. 

Remove the vacuum bag from the unit as instructed in the 

OPERATION section to obtain access to flail screen.

4. 

Remove self tapping screw on right side of unit that 

attaches to the flail screen. See Figure 6-2.

5. 

Remove hex screw on top of rear housing near mounting 

bracket and the flange lock nut that secures flail screen. 

See Figure 6-2.

6. 

Remove and clean the screen by scraping or washing with 

water. See Figure 6-3.

7. 

Reinstall the screen.