O2 Innovations DSL Router プリント

ページ / 2
The O
2
 DSL Connection Manager is located on the O
2
 DSL Starter CD and 
assists you in configuring your network and DSL router.
Preparing for the installation
Switch your computer on and then insert the O
2
 DSL Starter CD           
into the CD-ROM drive. Please close all open applications before 
commencing the installation.  
Note: If installation does not start automatically, you can start it manually 
by double-clicking on the cdrun.exe program on the CD-ROM.
Tip: Your network can also be configured without the O
2
 DSL Connection 
Manager. To do this, all the necessary settings must be configured manually  
via the user interface of the DSL router (see above – users of other  
operating systems). 
Software installation and configuration – only Microsoft Windows operating systems
Users of other operating systems such as Mac OS or Linux can configure their network settings directly using the graphical user interface of the DSL router. This can be accessed via a browser at the 
following URL: http://192.168.1.1 (password: 1234). The DSL router works with the following browsers: Internet Explorer ® (5.5 or above), Firefox ® (1.4 or above), Netscape ® (7 or above), Opera ® (9.0 
or above), Safari ® (1.3.2 or above) or Konqueror ® (3.4.0 or above). Further tips can be found in the O
2
 DSL Router user instructions on the O
2
 DSL Starter CD. 
O
2
 
wishes you hours of happy surfing and DSL telephoning with O
2
 
DSL! 
Software installation
6
Select the item »DSL Connection Manager installieren« on the welcome screen. Now follow the 
instructions given by the installation wizard and confirm each step with »Weiter« or »Fertig stellen«.  
Your computer must be restarted after successfully installing the software. When your computer 
restarts, it will automatically load the O
2
 DSL Connection Manager configuration wizard, which will 
guide you step-by-step through setting up your network and DSL router.
Insert O
2
 
DSL Starter CD
5
F
Errors excepted. W
e reserve the right to make changes at any time. Revised: April 2008. 
Verifying the installation
8
After successfully configuring your network and DSL router, the O
2
 DSL 
Connection Manager will start automatically.
This program makes it easier for you to manage your DSL router and your 
DSL connection. You can directly view and amend the settings of the DSL 
router using the O
2
 DSL Connection Manager, as well as implementing error 
diagnoses.
You can find further information about this in the »DSL Connection 
Manager« manual on the O
2
 DSL Starter CD        .
Completion of quick configuration
Customer support
Our customer support hotline is available to assist you with the setting up 
of your O
2
 DSL Router Classic and for any other questions you may have  
regarding the full functionality of the DSL router.
Contact our hotline:
•  From a landline: dial +49 (0) 18 05.
 
62 43 57 (o2HELP) – for 14 cents per minute
•  If you have an O
2
 Germany mobile phone contract, call from the O
2
 Germany 
mobile phone network on +49 (0) 179. 55 222 – free of charge.
If our hotline is unable to assist you, we will gladly send a service technician to 
your home at your request. 
If the DSL router LEDs are illuminated as shown below, your O
2
 DSL is ready for use. 
 
 
 
If there is more than one Ethernet/LAN connection, the corresponding LEDs also illuminate.  
You can now surf the internet and make phone calls with the O
2
 DSL. 
Note: If the LEDs are not illuminated as shown, please verify each installation step or call 
our customer support hotline.
7
F
F