NexxTech super slim divx/mpeg4 dvd player 1617008E ユーザーズマニュアル

N o Power

• Check if the power cord has been properly connected to the power outlet.

     
     

• Check if the main power has been switched on.

  Does not play 

• No disc, load a disc.

     

• Disc has been loaded upside down. Place the disc with the label side up.

     

• Disc’s region code does not match to the player.

     

• Disc’s rating level is higher than the player’s rating level setting.

     

• Disc is not the correct type for the player.

     

• Disc is damaged or dirty, clean the disc or try another disc.

     

• Moisture may be condensed inside the player. Remove the disc and leave 

     

  the unit power on for one or two hours.

  No picture 

• Check if the TV set has power on, use TV remote to select A/V signal for 

     

  DVD rather than broadcast.

     

• Check if the system connection is proper and secure.

     

• Check if the connection cables are damaged.

     

• Clean the disc.

     

• Please press the OPEN button, then press the PROGRAM and ZOOM   

     

  button to return factory default status.

  Picture 

• The disc is dirty or damaged. Clean the disc or try another disc.  

 

  noise/distorted 

• Reset the color system of the TV set.

     

• Try to connect the player directly to the TV set, without via a VCR for 

     

example.

  Picture not full 

• Select the screen format from the player’s SETUP MENU, 

  screen 

see “SETUP MENU” of this manual. 

     

• Select the screen format from DVD disc menu.

  Problem  

Following message will display when there is a problem with the loaded disc:

  message display 
  on screen 

• “WRONG REGIONAL DISC”: Disc’s region code does not match to the  

     

 

 

 

    player.

     
     

• WRONG PASSWORD”: The player refuse to play a disc with rating level  

     

 

higher than the player’s rating level setting, or input  

     

 

the wrong password in the setup menu. 

     
     

• “WRONG DISC”: The player is equipped with automatic disc quality    

     

     

detection software. When the player detects a problem disc  

     

     

or a damaged disc, the player may keep playing the disc at  

     

     

lower quality or stop playing, depending on the damage  

     

     

level of the disc.

  Malfunction 

• Should the player develop a malfunction, unplug the player for 30 minutes.  

     

  After 30 minutes, power on the player and the restore function should reset  

     

  the player.