KUHN RIKON Kuhn Rikon Corp. Saw 10" Cabinet Saw Sliding Table ユーザーズマニュアル
15
BEFORE CLEANING OR CARRYING OUT MAINTENANCE WORK, DISCONNECT
THE MACHINE FROM THE POWER SOURCE (WALL SOCKET). NEVER USE WATER OR OTHER
LIQUIDS TO CLEAN THE MACHINE. USE A BRUSH. REGULAR MAINTENANCE OF THE MACHINE
WILL PREVENT UNNECESSARY PROBLEMS.
Keep the table clean to ensure accurate cutting.
Keep the table mounting area clean to ensure accurate operation of all moving parts and prevent
excessive wear.
excessive wear.
Check sliding table alignment to the table saw work surface to correct or prevent rubbing.
Keep the inside (near the saw blade, etc.) clean to prevent accumulation of dust.
Caution!
Maintenance
Rip Fence Installation
Fence Bar Placement with Sliding Table
With the sliding table installed the front and rear
fence bars must be relocated. Align the notches in
the fence bars with the right miter slot in the main
table. (A-Fig. 26)
fence bars must be relocated. Align the notches in
the fence bars with the right miter slot in the main
table. (A-Fig. 26)
Follow the fence installation instructions found
on page nine of the 10-110/10-050 Cabinet Saw
manual.
on page nine of the 10-110/10-050 Cabinet Saw
manual.
Figure 26
A