Kraus USA Kralin Wireless Access Point 54MB Single Port Cod. KR.XJ ユーザーズマニュアル

www.kraun.it

User’s Manual

The following contents should be found in your box:

•  One Wireless Access Point 54MB Single Port
•  One AC power Adapter for Wireless Access Point 54MB Single Port
•  One Resource CD for Wireless Access Point 54MB Single Port, includ-

ing:
• This Guide
• Other Helpful Information

Note: If any of the listed contents are damaged or missing, please con-

tact the retailer from whom you purchased the Wireless Access Point 

54MB Single Port for assistance.

Thank you for choosing the Wireless Access Point 54MB Single Port. 

This AP provides connectivity between Ethernet wired networks and 

radio-equipped wireless devices. It adopts 2x to 3x Extended Range

TM

 

WLAN transmission technology so that transmission distance is 2-3 

times of traditional IEEE 802.11g/b solutions, up to 855.36m tested in 

China. Transmission range is extended to 4-9 times.

It is an easy, Web-based setup for installation and management. Even 

though you may not be familiar with the AP, this guide will make con-

figuring the AP easy. Before installing the AP, please look through this 

guide to get to know all the functions.

This Guide tells you how to use the Wireless Access Point 54MB Single 

Port. 

The “AP” mentioned in this guide stands for Wireless Access Point 54MB 

Single Port.

Chapter 1: About this Guide
Chapter 2: Introduction
Chapter 3: Connecting the AP
Chapter 4: TCP/IP Configuration
Chapter 5: Configuring the AP
Appendix A: FAQ
Appendix B: Configuring the PCs
Appendix C: Specifications
Appendix D: Glossary

The Wireless Access Point 54MB Single Port is the basic building block of 

a wireless LAN infrastructure. It provides connectivity between Ethernet 

wired networks and radio-equipped wireless notebook systems, desk-

top systems, print servers, and other devices. 

The Wireless Access Point 54MB Single Port acts as a bridge between 

the wired LAN and wireless clients. Connecting multiple Access Point 

Access Points via a wired Ethernet backbone can further lengthen the 

wireless network coverage. As a mobile computing device moves out of 

the range of one access point, it moves into the range of another. As a 

result, wireless clients can roam freely from one Access Point to another 

and still maintain seamless connection to the network.

In the most attentive wireless security, the Wireless Access Point 54MB 

Single Port provides multiple protection methods. It can be set to turn off 

wireless network name (SSID) broadcast so that only stations that have 

the SSID can be connected. The AP provides wireless LAN 64/128/152-

bit WEP encryption security, and WPA/WPA2 and WPA-PSK/WPA2-PSK 

authentication, as well as TKIP/AES encryption security. It also supports 

VPN pass-through for sensitive data secure transmission.

The Wireless Access Point 54MB Single Port complies with the IEEE 

802.11g/b standards so that the data transmission rate is up to 54Mbps. 

It adopts 2x to 3x Extended Range

TM

 WLAN transmission technology so 

that transmission distance is 2-3 times of traditional IEEE 802.11g/b so-

lutions, up to a distance of 855.36m tested in China. Transmission range 

is extended to 4-9 times. It is compatible with all IEEE 802.11g and IEEE 

802.11b products.

• Complies with IEEE 802.11g, IEEE 802.11b, IEEE 802.3, IEEE 802.3u 

standards

•  Adopts 2x to 3x Extended Range

TM

 WLAN transmission technologies

•  Supports 54/48/36/24/18/12/9/6Mbps or 11/5.5/3/2/1Mbps wire-

less LAN data transfer rates

•  Provides WPA/WPA2 and 64/128/152-bit WEP encryption security
•   Built-in DHCP server supporting dynamic IP address distributing
•  Supports MAC address filtering
•   Supports multiple operating modes (AP/AP Client/Repeater/Bridge/

Multi-Bridge)

•  Supports TCP/IP, DHCP, SNMP
•   Supports Traffic statistics
• Supports firmware upgrade
•   Supports Remote and Web management.

Viewed from left to right, as shown in figure 2-1, the front panel of the 

Access Point consists of four LEDs, which is designed to indicate con-

nections. Table 2-1 describes the LEDs on the front panel of the AP.

POWER Off 

Power 

off

 On Power 

on

SYSTEM On 

Initializing

 Flashing 

Working 

properly

 

Off 

There’s a hardware error

LAN 

Off 

There’s no device linked to the corresponding 
port

 

On 

There’s a device linked to the corresponding 
port but no activity

 

Flashing 

There’s an active device linked to the 
corresponding port

WLAN 

Off 

The Wireless Radio function is disabled

 

Flashing 

The Wireless Radio function is enabled

Wireless Access Point 54MB Single Port

Table 2-1