Namco Bandai Games spin the spin ユーザーズマニュアル
WHEN INSTALLING
ENSURE THAT THE MACHINE IS LEVEL AND STABLE BY
RAISING AND ADJUSTING THE LEVEL ADJUSTERS.
FAILURE TO COMPLY MAY CAUSE THE BALL TO NOT SPIN
CORRECTLY OR THE TILT SWITCH TO MALFUNCTION.
Adjusting the Level Adjusters
When the machine is in it’s final position, lower the four level
adjusters, with a spanner, so that the castors are raised from the
floor by approximately 5mm and the machine is level. Tighten
the lock nuts with a spanner to ensure that the level adjusters do not
move.
adjusters, with a spanner, so that the castors are raised from the
floor by approximately 5mm and the machine is level. Tighten
the lock nuts with a spanner to ensure that the level adjusters do not
move.
If the machine is installed on a smooth or shiny floor, it is
recommended that rubber pads are fitted under each adjuster to
prevent the machine from moving when being played.
recommended that rubber pads are fitted under each adjuster to
prevent the machine from moving when being played.