CTEK Power USA Network Router CDMA2000 1XRTT Access Point and Router ユーザーズマニュアル
Part Number 91-007-02
1
Preface
Welcome to the Ctek Series 4100E SkyRouter User’s Guide. The User’s Guide will explain the basic operation of a
SkyRouter and take you through the necessary settings to get your wireless application online. Additional information and
applicable technical notices can be found at
www.ctekproducts.com
.
1 Introduction
SkyRouter provides application and network designers with a bridge between the world of IT infrastructure and the
evolving wireless data networks. With SkyRouter the wireless transport is fully integrated into the product’s routing fabric
meaning that you can approach the setup and operation of this product much as with any other IP addressable device.
Wireless considerations are reduced to the absolute minimum necessary to register and make connections on a network.
1.1 Theory Of Operation
The Series 4100E SkyRouter is a complete IP router that routes traffic over LAN Ethernet (10/100baseT) connections.
The wireless features of SkyRouter simply extend the IP routing capabilities to include routing and network address
translation (NAT) over CDMA2000/1XRTT wireless networks. As with most routers Ctek’s Series 4100E SkyRouter can
be viewed as having a Local Area Network (LAN) side and a Wide Area Network (WAN) side. Traffic originating at
SkyRouter’s Ethernet ports is considered LAN traffic. The Wide Area Network connection is over the wireless network’s
1XRTT transport.
1.2 Features
This manual covers SkyRouter (4100E) Release 1.00 and contains the following feature and functions.
1) Ethernet
a. Static
Addressing
b. Dynamic (DHCP) Server
c. DHCP
c. DHCP
Client
d. Configurable DNS address
e. Configurable Gateway, Sub net mask, and Broadcast address
f. Port
e. Configurable Gateway, Sub net mask, and Broadcast address
f. Port
Forwarding
g. Service
management
2) CDMA
Interface
a. Enable/Disable Wireless Routing
b. Enable/Disable inbound IP requests
c. Adjust inactivity timers
d. Name Server Interoperability with UDP or SMS
e. DDNS Interoperability with BIND or MS Server
f. Administration web server port address selection
g. Enhanced OTA and manual activation
h. Home Network Selection
b. Enable/Disable inbound IP requests
c. Adjust inactivity timers
d. Name Server Interoperability with UDP or SMS
e. DDNS Interoperability with BIND or MS Server
f. Administration web server port address selection
g. Enhanced OTA and manual activation
h. Home Network Selection
3) Relay Contact Closure (detection and operation)
a. NO/NC
detection
b. SMS or email cry out alarm
4) Relay Driver Output