Electrolux OHV ユーザーズマニュアル

22

23

SECTION 6: ADJUSTMENTS

6.01 Belt Guide
6.11 Klik Pin Position for wheels on Power Steering Drive Snowthrower
6.12 Klik Pin Positions for wheels on Standard Drive Snowthrower
6.21 Adjustment for Drive System Control Rod
6.22 Adjustment for worn Traction Disc Ring
6.23 Adjustment for Auger Control Rod
6.24 Adjustment for Speed Control Rod
6.31 Procedure to add shim washer when Power Steering Slips

6.01 Belt Guide - 
* Remove spark plug wire from plug.
* Engage auger lever and adjust clearance be-
tween belt and belt guide to 1/16" to 1/8".

* To Push the snowthrower easily, the Klik Pin 
should be through the outer axle hole, with the 
wheel hub to the inside.

* For the wheel to drive, the Klik Pin should be 
positioned through both the wheel hub and inner 
axle hole.

* This is the only position for the Klik Pin where the 
Power Steering will work.  The hole in the wheel 
hub is 

NEVER used with Power Steering.

For Husqvarna Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com