Cosmorex SE オーナーマニュアル
FOR SUCCEEDING EXPOSURES .. .
You are ready for your next picture in an instant -
You are ready for your next picture in an instant -
just move the Film Transport Lever (1) until fully
wound, and you're set: just frame, focus, and
shoot. As lighting may change, it's a good idea to
check the Exposure Meter Needle (17) from time
to time, to make sure it's still lined up with the
Exposure Meter Circle (16). If it is not, just take a
new exposure "reading" of your subject, move
the Lens Aperture Ring (26) to the new aperture
shown on the Exposure Meter Aperture Indicator
(20) - and continue shooting!
wound, and you're set: just frame, focus, and
shoot. As lighting may change, it's a good idea to
check the Exposure Meter Needle (17) from time
to time, to make sure it's still lined up with the
Exposure Meter Circle (16). If it is not, just take a
new exposure "reading" of your subject, move
the Lens Aperture Ring (26) to the new aperture
shown on the Exposure Meter Aperture Indicator
(20) - and continue shooting!
UNLOADING
When you've finished your roll of film, the film
must be re-wound back into the cassette so it may
be removed and processed. Here's how:
must be re-wound back into the cassette so it may
be removed and processed. Here's how:
1. When you have taken the last exposure (
number 20 or 36, depending on the length of
cassette used), turn the Rewind Release Ring (
3) all the way to the left so that the Red Dot
points at the "R" engraved on the camera's
top. Be sure the Rewind Release Ring has been
moved fully towards the left until no further
movement is possible. (In some instances the
film transport lever [1 ] will stop be-
cassette used), turn the Rewind Release Ring (
3) all the way to the left so that the Red Dot
points at the "R" engraved on the camera's
top. Be sure the Rewind Release Ring has been
moved fully towards the left until no further
movement is possible. (In some instances the
film transport lever [1 ] will stop be-