Cosmorex SE オーナーマニュアル

*Make sure you have moved the Self-Timer

Lever as far as it will go before pressing the
Release Button. If the Lever has not been fully
wound, the shutter will not operate. (Should
this happen, just move the Self-Timer Lever
downwards again - fully this time - and press
the Release Button again.)

*If you decide not to use the Self-Timer after

moving the lever down, simply take your next
picture by pressing the Shutter Release
Button (2). Then, before moving the Film
Transport Lever, press the SelfTimer Release
Button (9) and the Timer will return to
normal position. Do not leave the Self-Timer
Lever in "wound" position for extended
periods.

Your Cosmorex SE single-lens reflex camera
accepts literally hundreds of fine lenses in the
popular "Universal" (42mm) thread mount. To
remove your lens, just grasp firmly, and turn it to
the left (counter-clockwise) about three turns. To
attach a lens, simply screw it into the camera's
lens mount by turning it clockwise until no
further movement is possible.

A

fter changing lenses, check that the Auto/

Manual Switch (14) is on "A" position before
picture taking. This insures that you will be
able to frame and focus easily.