Jensen CR560X ユーザーズマニュアル

®

No convenient power wire? Install a fuse
adapter having a spade connector.

Crimp on a matching connector and attach:

• Yellow wire–Fuse marked MAIN, BAT

or PWR

• Red wire–Fuse marked ACCY

(accessory), or RADIO

1. Install adapter if necessary. Install half-

sleeve into adapter from front of dash. It
will be a tight fit.

2. Bend over tabs where possible to secure

half-sleeve to adapter or inside of dash.

3. Install strap to strut under dash. Secure

strap to an existing screw.

Not needed for ISO-DIN (Japanese vehicle) installation.

If wiring connections are made wrong, the
unit will not operate properly and it could be
damaged. Follow the installation instructions
carefully, or have the installation handled by
an experienced technician.

(supplied)

(optional)

(supplied)

5588 CR560X_EIN.p65

2/29/00, 10:46 PM

5