SMART Technologies Document Camera 330 ユーザーズマニュアル

CHAPTER 2 – SETTING UP YOUR DOCUMENT CAMERA

Setup configurations for Camera view and 
SD Card view

After you complete the basic connection procedure (see page 8), you can connect 
your document camera to an external display. This enables you to use the document 
camera in Camera view and SD Card view. See page 14.

You can connect your computer and your document camera to different displays or 
they can share a display.

The document camera and computer use different displays

In this configuration your document camera images appear on one display, and your 
computer’s desktop appears on the other display. You can also access document 
camera images through SMART Notebook on your computer.

1. Complete the basic connection steps (see page 8).

2. Connect your computer or laptop to the projector of an interactive display.

NOTE
This is the normal configuration for using interactive whiteboards.

3. Connect your document camera to another external display. See page 10.

The document camera and computer share a display

In this configuration your document camera is connected to your computer with both a 
USB and a VGA cable. Your document camera is connected to an external display.

1. Complete the basic connection steps (see page 8).

2. Connect your computer’s VGA Out port to your document camera’s VGA In port 

with a VGA cable.

3. Connect your document camera to an external display with a VGA cable. See 

NOTE
DVI-D or composite video displays will not display your computer view. A VGA 
display is required.

This configuration will permit easy transition from Computer view to Camera view or 
SD Card view, using the same projector or display for all three views.