SMART Technologies Document Camera 330 ユーザーズマニュアル

CHAPTER 3 – USING YOUR DOCUMENT CAMERA

Using your document camera with SMART 
Notebook software

Your document camera integrates with SMART Notebook software, allowing you to 
control your document camera from your computer or a SMART Board interactive 
whiteboard. You can display objects, capture an image and your annotations on an 
image to a SMART Notebook page, zoom, focus and adjust brightness settings.

1. Press the power   button on the control panel.

2. Set your document camera to Computer view (see page 21) or Camera view (see 

page 24).

3. Start SMART Notebook software.

4. Place the object you want to display under your document camera.

5. Rotate the camera head and aim the lens at your subject.

6. In SMART Notebook software, press the document camera   icon.

OR

Select Insert > Picture From SMART Document Camera from the menu.

The SMART Document Camera object appears displaying your subject.

IMPORTANT
If you can’t control your document camera from SMART Notebook, ensure 
that your document camera is set to Application mode. See page 34.

Press the zoom   plus or minus buttons in SMART Notebook software to increase or 
decrease the zoom magnification.

OR

Use the zoom dial on your document camera.

1. Press the auto focus 

 button in SMART Notebook to focus automatically.

2. If necessary, press the focus   plus or minus buttons to adjust the focus.

Press the brightness   plus or minus buttons to either increase or decrease subject 
brightness.