Multi-Tech Systems Multi-Tech MultiFRAD 100-Series FR111 ユーザーズマニュアル

45

4

If the data port is being setup for Async mode of operation and a
port speed of 57.6K, initially the data port does not have to be
changed, proceed to step 6 to configuring the Trunk.

Data Port Configuration

1  - Async/Sync:               Async
2  - Speed:                    57600
3  - Word Length:              8
4  - Stop Bits:                1
5  - Parity:                   None
6  - Flow Control:             CTS
7  - Enq/Ack Flow Control:     Off
8  - Echo:                     Off
9  - Pacing:                   Off
10 - EIA Pass Through:         Off
11 - Pass Xon:                 Off
S  - Store All Configurations
M  - Main Menu
P  - Previous Menu

Selection : _

If the data port configuration needs to be changed, enter the
option number to be changed and a submenu is displayed.
Change the option to meet the conditions of your installation.
When the data port is configured to meet your site requirements,
proceed to step 6 to configure the Trunk.

5

Change the Sync Data Port Configuration to meet the conditions
of your installation by selecting the option needing change and a
submenu is displayed with your selections.

Data Port Configuration

1 - Async/Sync:               Sync
2 - Speed:                    57600
3 - Idle Condition:           Flags
4 - NRZ/NRZI Encoding:        NRZ
5 - CRC Preset:               All 1s
6 - Inter-frame Timer:        Off
S - Store All Configurations
M - Main Menu
P - Previous Menu
Selection : _

When the Sync Data Port is configured to meet your site require-
ments, enter the letter S and press ENTER to store all configura-
tions.  Then enter the letter P and press ENTER to return to the
Configuration menu.