Franklin CALLER ID RBI-100 ユーザーズマニュアル
3
Getting Started
To Install the Battery (Not Included)
Note: The Caller ID will not function without a
battery.
1. Disconnect the telephone line.
2. Lift the battery compartment door on the
battery.
1. Disconnect the telephone line.
2. Lift the battery compartment door on the
back of the Caller ID.
3. Install a 9-volt battery.
4. Replace the battery compartment door.
4. Replace the battery compartment door.
To Connect the Telephone Line
1. Connect one end of the telephone cord into
one of the jacks on the back of the Caller
ID (either jack can be used) and connect its
other end into the wall jack.
ID (either jack can be used) and connect its
other end into the wall jack.
2. Connect one end of the included telephone
cord into the other jack on the Caller ID
and connect its other end into your tele-
phone.
and connect its other end into your tele-
phone.
3. If desired, use two anchor screws to mount
your Caller ID on a wall.